RFID Download Page
 
DLP-RFID2 Downloads Version 1.8 (Updated 10-17-2014)

Click here to download the DLP-RFID2 Version 1.8 source code project. This newer version of the code does not echo back the incoming command packet.

Click here to download the DLP-RFID2U demo board source code project.

Click here to download the Texas Instruments demo GUI.

Click here to download the Texas Instruments TRF7970A Users Guide.

Click here to download the Texas Instruments TRF7970A Firmware Guide.

Click here to download the Visual Studio Source code for the Texas Instruments demo GUI.

Click here to download the Visual Studio 2010 Source code for a simple GUI that works with FTDI's D2XX Direct API.



DLP-RFID2 Downloads Version 1.7 (Legacy Product)

Click here to download the DLP-RFID Version 1.7 source code project. All incoming command packets are echoed back beginning immediately with the first byte received. For this reason, interrupts must be used in the host.

Click here to download the DLP-RFID2U demo board source code project.

Click here to download the Texas Instruments demo GUI.

Click here to download the Texas Instruments ISO15693 Host Command document.



DLP-RFID1 Demonstration Applications

Click here to download the single tag demo app. (VC++ source code)

Click here to download the single tag demo app for most non-TI ISO15693 tags.

Click here to download the single tag demo app for other non-TI ISO15693 tags.

Click here to download the addressed tag demo app.

Note: Source code for these projects is available upon request.

Click here to download the keystroke emulator demo app. This demonstration app will read the UID from a tag and then key the value in to the current cursor location of any program currently running. Click here to download the keystroke emulator demo app with a carriage return and line feed added.



DLP-RFID1 Programming Library

Click here to download the single tag read only library.

Unzip these files to a temporary folder and run the installer exectuable.
The installer will create a folder under Program Files (or a folder of your
choice) and install the USB Drivers, a Visual C++ demonstration project,
and a Visual Basic demonstration project.

The library .DLL file is included in both projects.

NOTE: Visual Studio Version 6 (or more recent) is required in order to compile.





DLP-RFID-LP8C Files (April 2015) Click here to download the DLP-RFID-LP8C source code project. This newer version of the code does not echo back the incoming command packet and is designed to work with the Texas Instruments GUI.

Click here to download the Texas Instruments demo GUI.


DLP-RFID-LP8C Files (Legacy Files)

Click here to download the original November 2009 DLP-RFID-LP8C firmware image.

-------------

Click here to download the Virtual COM Port based VC++ demo project source code.

Click here to download the compiled demo app.

-------------

Click here to download the Virtual COM Port based VC++ demo project source code for version 2 (updated Nov. 2009).

Click here to download the compiled demo app for version 2 (updated Nov. 2009).

-------------

Click here to download the D2XX based VC++ Addressed Command demo project source code (updated Dec. 2009).

Click here to download the compiled demo app (updated Dec. 2009).





DLP-RFID-UHF1B Files

Click here to download the D2XX based VC++ demo project source code.

Click here to download the compiled demo app.

 
 




© Copyright DLP Design. All rights reserved